The new PowerPinner Glider 7105 Rapid Fire has all the features of our standard 7105 welder plus a special program that allows the operator to continuously fasten weld pins while depressing the foot pedal. This option works when the arm is locked in the vertical posistion and the machine is foot pedal activated. The RF will keep welding pins until the operator removes his foot from the pedal. This maximizes speed for the fastest possible pinning operation. Flip a switch and the machine returns to a manual mode for larger pieces of duct work.
The PowerPinner Glider 7105 Rapid Fire features simple, reliable electronic controls and a high output transformer that will fasten 1/2" to 2" pins to 16-26 gauge sheet metal.
Other features include:
Permit continuous lining of flat or L section flanged duct.
The PowerPinner Glider 7105 Moving Head Welder uses a PLC (Programmable Logic Control) and non-contact proximity sensors in place of pneumatic valves and mechanical actuators.
Simple logical controls reduce operation training.
Fastens large duct sections, reducing material handling.
Affords easy access for service needs.
Quickly confirms electronic functions.
Protects electrical component to minimize machine down-time.
Allows easy movement by operator; cord protector prevents damage.
Place between work tables for efficient work flow.
|Input Voltage||190-240 VAC 60Hz, 1 Phase, 30 Amp|
|Air Requirement:||2-3 CFM, 80 PSI|