SIDEWINDERThe SideWinder Spiral Pipe machine has one of the most compact foot prints in the industry and could easily be taken to a job site! Easy set-up means minimal delay when changing from one diameter to another.
*No flood coolant. No mess on your shop floor- outside of pipe remains dry.
*Our unique forming process reduces scrap because we form outside the head.
*Inside diameter is always the same regardless of gauge being formed.
*New improved guarding ensures operator safety
*Our patent pending seam lock ensures consistent inside diameters from end to end.
MACHINE SPECS AND FEATURES*Spiral duct production from 3" to 50" in 18GA max. 28GA min. mild steel
*24 gauge maximum stainless steel material
*Galvanized, satin coat (paint grip), aluminum, and polyvinyl coated, stainless steel and pre-painted metal.
*High quality workmanship and heavy duty construction.
*Low maintenance, portable, simple operation, unique design.
*User friendly PLC controls pipe diameter, lubrication, calculates strip length and strip feed.
*Material forms on the outside of the head reducing scrap significantly.
*Maximum speed 200 surface feet per minute
*Easy change heads make for quick size changes
*Patent pending Dimple-Lock seaming rolls eliminate seam slippage
*Micro drop lubrication means exterior of pipe remains oil free and ready for paint
*Multiple uncoiler ready
*Saw cut-off head moves with spiral duct (Includes six chrome vanadium blades)
*Variable speed strip feed control mounted on saw handle allows for full control of cut-off
*Includes run-out table for 10' section of pipe with photo sensor cut length control
*Lightweight helix mandrels form material outside of head
*Uncoiler capacity 2000 lbs
*Coil I. D. 20", Maximum O. D. 46"
*Coil strip width 2.95" for 3" to 7" spiral duct
*Coil strip width 5.875" for 8" to 50" spiral duct
*Minimal shop air required
*Main drive motor is 10 HP at 220 volt 3 phase
*Saw motor is 5 HP at 220 volt 3 phase
*Dimensions 78" X 96" (Less run-out table)
*Weight 2500 lbs
BASE MACHINE WITH STANDARD FEATURES*Installation set up and training by factory trained personnel
*Six 10" chrome vanadium saw blades
*Single 2000 lb uncoiler
*Run-out table for 10' pipe with photo sensor cut length control
*Seaming rolls with dimple lock technology to form 20 to 28 gauge mild steel
*Knurled drive rolls
*Micro drop lubrication system
PACKAGES INCLUDEPackage #1
Includes base machine and all standard features with forming heads from 4" to 26" in 2" increments.
Includes base machine and all standard features with forming heads from 4" to 36" in 2" increments.
Includes base machine and all standard features with forming heads from 4" to 48" in 2" increments.
Includes base machine and all standard features with forming heads from 3" to 16" in 1" increments, forming heads from 18" to 50" in 2" increments, one additional 2000 lbs and a second run-out table for 20' lengths of spiral duct.
OPTIONAL ACCESSORIES*Additional 2000 lb uncoiler
*Additional run-out table for longer lengths of spiral duct and cut length control
*Additional chrome vanadium saw blades
*Additional seaming roll with seam lock dimple lock for 18 gauge
OPTIONAL FORMING HEADS* 3" to 16" in 1" increments
* 18" to 50" in 2" increments
* Other sizes available upon request
Please watch our video here >
Diamond Plating Option > https://www.youtube.com/watch?v=gYxD5eYoMEw
Perforating Option > https://www.youtube.com/watch?v=Q2OFvp4OaGE
Rectangular Ductwork > https://www.youtube.com/watch?v=9fwSx0yle8c
Double Wall Fabrication > https://www.youtube.com/watch?v=CUczuqK6_EE
Double Wall Fabrication > https://www.youtube.com/watch?v=YOgRaXSffHg
Lift Jack for Spiral > https://www.youtube.com/watch?v=U2Hs9owSijw
ARMAFLEX/ArmaCel Fabrication > https://www.youtube.com/watch?v=EyZK3PY2pR8
We offer setup & training at no cost. Give us a call toll free at 800-753-0393 or fill-out the form below. We have plenty of references on this machine to share with you. Let us know.